Yamaha EMX68s - Manual (Page 9)

EMX88S/EMX68S Quick Guide
7
EMX88S/EMX68S—Owner’s Manual
Connecting a microphone
Make sure that the power is turned off to the
EMX88S/EMX68S.
Connect a microphone to the Low-Z jack or MIC
jack.
Using a condenser microphone
Turn on the PHANTOM switch (located in the upper
right corner on the panel).
• Do not connect or disconnect a condenser micro-
phone while the power to the unit is on and the
PHANTOM switch has been turned on.
Connecting a CD player, MD player, and/or cassette
deck
Connect a CD player or MD player to the 2TR IN
jacks. Refer to the operation manual of the corre-
sponding device for more information on the
input and output of the device.
• To connect a second player, use the LINE jack or Hi-
Z jack.
• You cannot use the Hi-Z jack and the Low-Z jack for
the same channel at the same time. If a microphone
has already been connected to the Low-Z jack of a
channel, you cannot connect a player to the Hi-Z
jack of the channel.
• Connect a recorder to the REC OUT jacks.
EMX88S (EMX68S)
Microphone
EMX88S (EMX68S)
PHANTOM switch
EMX88S (EMX68S)
Recorder
(Cassette, DAT, MD)
CD player