Zebra Technologies 2844 Printer - Manual (Page 13)

Getting Started
This section describes how to set up your printer for the first time and use
the most common operating procedures for loading media in tear-off mode.
Modes of Printing
You can operate this printer in different modes:
�
Standard tear-off mode allows you to tear off each label (or a strip of
labels) after it is printed.
�
In optional peel-off mode, the backing material is peeled away from the
label as it is printed. After this label is removed, the next one is printed.
�
In optional liner-free mode, labels have no backing. This option is only
available with a special platen.
�
In optional cutter mode, an attached unit cuts through the media.
The printer typically uses roll media, but you can use fan-fold or other
continuous media as well.
For procedures to use optional modes and features, refer to the Operation
and Options section.
980483-001A 7
H-970
PAGE 13 OF 47 0808 IH-970