Zebra Technologies 2844 Printer - Manual (Page 43)

Feed Button Modes
Printer Condition Feed Button Action
Printer is OFF
Printer is off. Tapping or holding the button has no result.
Printer is ON
Cover is open Tapping or holding the button has no result.
Labels, tags or
fan-fold forms are
loaded.
Tap the button once to perform a "form feed."
Hold the button to perform a "continuous feed."
The printer stops at the top of the next form.
Continuous media roll
is loaded.
Tap the button to perform a "line feed."
The printer stops on the next line.
Hold the button to perform a "continuous feed."
The printer stops at the next line when you release the button.
Fresh media has just
been loaded.
Tap the button to advance media. If printer fails to detect media,
the platen stops turning and the status LED lights Red; if the
printer cannot detect a gap within 11 inches (27.9 cm), the platen
stops turning and the status LED lights Amber.
40 980483-001A
H-970
PAGE 43 OF 47 0808 IH-970