Zap JACKSHAFT MOTOR-CONTROL SYSTEM 815-RL - Manual (Page 6)

CONTROL UNIT
model 800-R
Integrated Control unit
with case mounted
control button. This
Control unit will
power doors up to 15
square metres (160
square feet) in
conjunction with
model 8472 Operator.
MANUAL OVER-
RIDE model
ZA0093
The Manual Over-Ride
drive release mechanism
includes a Doorframe or
track mounted over
centre lever, which is
connected to the
Operator by a Bowden
cable. The screw hook on
the lever provides
adjustment of the v-belt
tension.
PLUG-IN BEEPER
MODULE model 850
(OPTIONAL)
The Plug-in Beeper module
is useful as an aid during the
initial setting up and
programming of the control
system.
JACKSHAFT
SUPER-DRIVE
OPERATOR
model 8472
The Super-Drive
Operator incorporates
a V-belt drive with a
Bowden cable v-belt
tensioning device,
which eliminates strain
on the jackshaft,
which is of particular
benefit for
applications fitted
with a hollow shaft.
MOTOR COVER KIT model ZA0094
The Motor Cover front simply clips onto the
motor body. The Cover back is easily secured to
the cover front with screws.
ZAP SUPER-DRIVE MOTOR-CONTROL SYSTEM
FOR SECTIONAL DOORS
The system includes model 800-R wall-mounting Control unit, Super-Drive jackshaft Operator,
Motor Cover kit and Manual Over-Ride kit.
PRODUCT OVERVIEW
1