Smt menu 1 - general setup, 1 introduction to general setup, 2 configuring general setup – ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

Page 504: Chapter 33 smt menu 1 - general setup, Figure 268 menu 1: general setup (router mode), Table 184 menu 1: general setup (router mode)

Advertising
background image

ZyWALL 5/35/70 Series User’s Guide

Chapter 33 SMT Menu 1 - General Setup

504

C

H A P T E R

33

SMT Menu 1 - General Setup

Menu 1 - General Setup contains administrative and system-related information.

33.1 Introduction to General Setup

Menu 1 - General Setup contains administrative and system-related information.

33.2 Configuring General Setup

1 Enter 1 in the main menu to open Menu 1 - General Setup.

2 The Menu 1 - General Setup screen appears, as shown next. Fill in the required fields.

Figure 268 Menu 1: General Setup (Router Mode)

Menu 1 - General Setup

System Name=
Domain Name=

Device Mode= Router Mode

Edit Dynamic DNS= No

Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this menu.

Table 184 Menu 1: General Setup (Router Mode)

FIELD

DESCRIPTION

System Name

Choose a descriptive name for identification purposes. It is recommended you enter

your computer’s “Computer name” in this field. This name can be up to 30

alphanumeric characters long. Spaces are not allowed, but dashes “-” and

underscores "_" are accepted.

Domain Name

Enter the domain name (if you know it) here. If you leave this field blank, the ISP

may assign a domain name via DHCP. You can go to menu 24.8 and type "sys

domain name" to see the current domain name used by your router.
The domain name entered by you is given priority over the ISP assigned domain

name. If you want to clear this field just press [SPACE BAR] and then [ENTER].

Device Mode

Press [SPACE BAR] and then [ENTER] to select Router Mode.

Advertising