8 editing tcp/ip options, Figure 277 menu 11.3.1: remote node ppp options, Table 194 menu 11.3.1: remote node ppp options – ZyXEL Communications Internet Security Appliance ZyWALL5UTM 4.0 User Manual

Page 517: Section

Advertising
background image

ZyWALL 5/35/70 Series User’s Guide

517

Chapter 34 WAN and Dial Backup Setup

Figure 277 Menu 11.3.1: Remote Node PPP Options

Menu 11.3.1 - Remote Node PPP Options

Encapsulation= Standard PPP
Compression= No

Enter here to CONFIRM or ESC to CANCEL:

This table describes the Remote Node PPP Options Menu, and contains instructions on how to
configure the PPP options fields.

Table 194 Menu 11.3.1: Remote Node PPP Options

FIELD

DESCRIPTION

Encapsulation Press [SPACE BAR] and then [ENTER] to select CISCO PPP if your Dial Backup

WAN device uses Cisco PPP encapsulation, otherwise select Standard PPP.

Compression

Press [SPACE BAR] and then [ENTER] to select Yes to enable or No to disable Stac

compression.

Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to

save your configuration, or press [ESC] at any time to cancel.

34.8 Editing TCP/IP Options

Move the cursor to the Edit IP field in menu 11.3, then press [SPACE BAR] to select Yes.
Press [ENTER]

to open Menu 11.3.2 - Remote Node Network Layer Options. Not all fields

are available on all models.

Advertising