Zanussi ZSF 6171 - Manual (Page 33)

33
Notes for Test Institutes
Testing in accordance with EN 60704 must be car-
ried out with the appliance fully loaded and using the
test cycle (see “Cycle Table”).
Tests in accordance with EN 50242 must be car-
ried out when the salt dispenser in the water softener
and the rinse aid dispenser have been filled with salt
and rinse aid respectively, and using the test cycle
(see “Cycle Table”).
Sample loading arrangements:
Full load:
12 place settings
including serving dishes Half load:
6 place settings including serving dish-
es, leaving alternate positions in the
rack free
Amount of detergent required: 5g + 25g (Type B) 20g (Type B)
Rinse aid setting: 4 (Type III) 4 (Type III)
Upper basket
*)
*) If necessary, you can remove the cup racks on the left-hand side.
Lower basket with cutlery basket
*)
Cutlery basket
*) If necessary, you can remove the cup racks on the left-hand side and/or the beer glass holder.