Zanussi ZSF 6171 - Manual (Page 35)

35
Installing the Dishwasher
• The dishwasher must be installed on a firm floor
and adjusted to ensure that it is stable and level in
all directions.
• To compensate for unevenness in the floor and to
match the height of the appliance to that of sur-
rounding units, extend the threaded feet using a
screwdriver.
• The drain hose, inlet hose and mains cable must
be laid so that they are able to move freely within
the plinth area, and so that they are not kinked or
crushed when the dishwasher is in position.
• The dishwasher must also be screwed tightly to
the work surface or to the adjoining units. This is
essential to ensure the dishwasher does not tip up.