Zanussi ZSF 6171 - Manual (Page 36)

36
Free-standing appliances
1
If the dishwasher is installed directly next to a
cooker, a heat-insulating, non-flammable pan-
el (laminated with aluminium foil on the side
next to the cooker) must be fitted flush with
the top edge of the work surface (depth 57.5
cm).
If the appliance is built-in under a kitchen work sur-
face, the worktop supplied with the dishwasher can
be removed in the following way:
1. Unscrew the screws from the elbows at the rear
(1).
2. Push the appliance’s worktop backwards about 1
cm (2).
3. Lift the worktop at the front (3) and remove it.
1
If the dishwasher is later used as a free-stand-
ing appliance, the work surface supplied with
it must be re-mounted.
3
The plinth on free-standing appliances is not
adjustable.