Zebra Technologies Cameo Portable Encoding Printer - Manual (Page 21)

21 UMAN-PEP
• Invalid label format or command structure — use Hex Dump
Mode for troubleshooting.
Reduced battery charge life:
• Recondition (cycle) battery.
• Damaged battery-replace.
• Check battery date code: if one to two years old, short charge
life may be due to normal aging.
Status light flashing and beeper chimes:
• No application: reload program.
• If using wireless communications: normal indication while data
is being received.
Status light always on:
• Check media is loaded and media compartment cover is
closed and latched
Communication Error:
• Check media is loaded, media compartment cover is closed
and latched, and error light is off.
• Check baud rate.
• Replace cable to terminal.
Card will not Read/Write:
• Ensure a smooth sliding motion is used and that card remains
seated in the MCE slot.
Never use any sharp objects on the printer
mechanism as it could damage the print head.
Use only alcohol, the supplied cleaning pen and
/or a cotton swab for cleaning the printer.