ZyXEL Communications 128MH - Manual (Page 146)

Prestige 128MH PSTN Router/Hub
11-2 Chapter 11 System Security
You can obtain a copy of the RADIUS software, along with documentation for the server, at
http://www.livingston.com/Tech/FTP/pub-le-radius.shtml
or at
ftp://ftp.livingston.com/pub/le/radius/
Follow the included instructions to install the server on your UNIX- or NT-based server.
Once you have installed the server, you will need to edit the [dictionary] file in the RADIUS
configuration directory (which will usually be [/etc/raddb]). Using any text editor, add the
following lines to the [dictionary] file:
# Zyxel proprietary attributes
ATTRIBUTE Zyxel-Callback-Option 192 integer
VALUE Zyxel-Callback-Option None 0
VALUE Zyxel-Callback-Option Optional 1
VALUE Zyxel-Callback-Option Mandatory 2
# Callback phone number source
ATTRIBUTE Zyxel-Callback-Phone-Source 193 integer
VALUE Zyxel-Callback-Phone-Source Preconfigured 0
VALUE Zyxel-Callback-Phone-Source User 1
These changes allow the RADIUS server to be used with ZyXEL CLID authentication, as
described in the section below.
11.1.2 Configuring the Prestige for RADIUS Authentication
To configure your Prestige to use the RADIUS server set up in the previous section, select option
23, System Security, from the Main Menu. This will bring you to Menu 23 - System Security.
Then from this menu, select option 2, External Server to bring you to Menu 23.2 - System