ZyXEL Communications 128MH - Manual (Page 149)

Prestige 128MH PSTN Router/Hub
11-5 Chapter 11 System Security
following is an example of a CLID user record:
5551212 Password = “Zyxel-CLID”
User-Name =”joeuser,”
Zyxel-Callback-Option = Mandatory,
Zyxel-Callback-Phone-Source = Preconfigured
Dialback-No = “5551212”
Note that if CLID is turned off in your Prestige, you still need to have a separate user record for
[joeuser] so the regular user name/password mechanism still works.
11.2 Configure the SMT Password
The following steps describe a simple setup procedure for configuring the SMT password.
Step 1. From the Main Menu, select option [23. System Security]
Step 2. From Menu 23 - System Security, you can select option [1. Change Password].This
will bring you to Menu 23.1 –
Step 3. In Menu 23.1 - System Security - Change Password, type in your previous system
password and press [Enter].
Step 4. Type in your new system password and press [Enter].
Step 5. Re-type your new system password for confirmation purposes and press [Enter] .
You will now need to enter in this password when you try to get into the SMT. In addition, this
password will also be used when a network administrator attempts to telnet to your Prestige.