ZyXEL Communications 128MH - Manual (Page 151)

Prestige 128MH PSTN Router/Hub
12-1 Chapter 12 Telnet Configuration and Capabilities
Chapter 12
Telnet Configuration and Capabilities
12.1 About Telnet Configuration
When you first configure your Prestige, it must be done via a computer connected to the RS-232
port. However, once your Prestige has been initially configured, you can use [telnet] to
configure the device remotely as shown in Figure 12-1.
Figure 12-1. Telnet Configuration on a TCP/IP Network
Modem / ISDN TA
E t h e r n e t L A N
Prestige with
Network IP Address
Telnet from any
station on the Network
Telnet from any
Remote Location
TCP/IP Network
Modem
ISDN TA
Modem/ISDN TA
Modem / ISDN TA
56 Kbps
56 Kbps
PSTN/ISDN Network
PSTN Network
(Telephone Line)
Prestige 128MH