Zanussi ZBD 902 - Manual (Page 10)

11
Remove the meat probe after use.
B C D E
HOW TO SET THE PROGRAMMER
B C D E
- +
A
KNOB
COOKING TIME
END OF COOKING MANUAL
MEAT PROBE TEMPERATURE
Press button B and while turning knob A
enter the required cooking time.
Press button C and while turning knob A
enter the end of cooking time. Turn the
thermostat and control function knobs to
the required settings. The oven tempera-
ture light nor oven light will illuminate
until the oven switches on. When cooking
is completed the AUTO signal will flash
and an audible signal will be heard for
approx. 2 mins. To cancel press button E
and return control and thermostat knobs
to '0' OFF.
TO SET THE COOKING TIME
TO SET END OF COOKING TIME
- +
Insert the jack plug of the meat probe into the
socket situated on the left hand side of the
oven. Insert probe into meat, close the oven
door. Press button E and while turning knob A
enter the required temperature.
When cooking is completed, an audible signal
will be heard for approx. 2 mins., to cancel
press button E.
Remove the meat probe after use.
- +
SETTING THE TEMPERATURE
FOR THE MEAT PROBE
To set oven for manual operation press
button "D".
MANUAL OPERATION
Press button B and C at the same time
and turn knob A to enter time of day.
SETTING THE TIME OF DAY
24 HOUR CLOCK
Press button B and while turning knob A
enter the required rime (max. 23 h 59
min.). After required time has been
selected the clock will revert to the time
of day. When time is up an audible signal
will be heard for approx. 2 mins. To
cancel press button B and return control
and thermostat knobs to '0' OFF.
SETTING THE TIMER
- +
- +
- +
AUTOMATIC COOKING
To cancel any programme press button B or C
CLOCK