ZyXEL Communications NPS-520 - Manual (Page 35)

NPS-520 User’s Guide
35
C
H A P T E R
3
Web Configurator
This chapter describes how to configure the NPS-520 using the web configurator.
3.1 Web Configurator Overview
The web configurator is an HTML-based management interface that allows easy NPS-520
setup and management via Internet browser. Use Internet Explorer 6.0 and later or Netscape
Navigator 7.0 and later versions. The recommended screen resolution is 1024 by 768 pixels.
In order to use the web configurator you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by
default in Windows XP SP (Service Pack) 2.
• JavaScripts (enabled by default).
• Java permissions (enabled by default).
See Appendix C on page 95 if you want to make sure these functions are allowed in Internet
Explorer or Netscape Navigator.
3.2 Accessing the NPS-520 Web Configurator
1 Make sure your NPS-520 hardware is properly connected and prepare your computer/
computer network to connect to the NPS-520 (refer to the Quick Start Guide).
2 Launch your web browser.
3 Type "192.168.1.6" as the URL.
"
The NPS-520‘s default IP address is 192.168.1.6.
4 Type "1234" (default) as the password and click Login. In some versions, the default
password appears automatically - if this is the case, click Login.