ZyXEL Communications NPS-520 - Manual (Page 37)

Chapter 3 Web Configurator
NPS-520 User’s Guide
37
• D - status bar
3.3.1 Title Bar
The title bar provides some icons in the upper right corner.
The icons provide the following functions.
3.3.2 Navigation Panel
After you enter the password, use the menus on the navigation panel to configure NPS-520
features.
The following table describes the menus.
3.3.3 Main Window
The main window shows the screen you select in the navigation panel. It is discussed in more
detail in the rest of this document.
Right after you log in, the Status screen is displayed.
3.4 The Status Screen
This screen displays general status information about the NPS-520.
Table 9 Title Bar: Web Configurator Icons
ICON DESCRIPTION
Help: Click this icon to open the help page for the current screen.
About: Click this icon to open the about screen where you can view driver and utility
version numbers of the NPS-520.
Logout: Click this icon to exit the web configurator.
Table 10 Screens Summary
LINK SUB-MENU FUNCTION
Status This screen shows the NPS-520’s general device, printer status
and TCP/IP information.
System Use this screen to change your administrative information and
system password.
Setup TCP/IP Use this screen to configure TCP/IP and DHCP settings.
Utilities Firmware
Upgrade
Use this screen to upload firmware to your NPS-520
Load Defaults Use this screen to reset the factory defaults (the password is 1234
and the IP address is 192.168.1.6).
Restart Server This screen allows you to reboot the NPS-520 without turning the
power off.