ZyXEL Communications NPS-520 - Manual (Page 42)

Chapter 3 Web Configurator
NPS-520 User’s Guide
42
Figure 19 Web Configurator: Utilities > Firmware Upgrade
The following table describes the labels in this screen.
Click OK when a screen displays asking you to confirm that you want to upload the firmware.
Figure 20 Firmware Upload Confirmation
Click OK when a screen displays asking you not to turn off the NPS-520 during firmware
upgrade.
Figure 21 Firmware Upload Warning
"
Do not turn off the NPS-520 while firmware upload is in progress!
The NPS-520 automatically restarts in this time causing a temporary network disconnect. In
some operating systems, you may see the following icon on your desktop.
Table 14 Web Configurator: Utilities > Firmware Upgrade
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to find it.
Browse... Click Browse... to find the .bin file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two minutes.