Yamaha RX-V1070 - Manual (Page 23)

23
ENGLISH
Adjustment of the REAR LEVEL
If desired, you can adjust the sound output level of the rear
speakers with this control even if the output level is already set
in “Speaker balance adjustment” on page 12. ● By continuously pressing “+” or “–” on the REAR LEVEL
control, the level value changes continuously. However, the
value stops changing momentarily at the point which was
once set in the “test” mode.
● Once the output level is adjusted, the level value will be the
same in all the digital sound field programs.
● If a digital sound field program is not used, the REAR
LEVEL control does not function.
Note
The values of the DELAY TIME, the FRONT EFFECT LEVEL,
CENTER LEVEL, and REAR LEVEL you set the last time will
remain memorized even when the power of this unit is off.
However, if the power plug cord is kept disconnected for more
than one week, these values will be invalid.
R
Adjustable. Illuminates.
REAR LEVEL