Yamaha RX-V1070 - Manual (Page 8)

8
CONNECTING S VIDEO TERMINALS
If your video cassette recorder, video disc player, etc. and your monitor are equipped with “S” (high-resolution) video terminals,
connect them to this unit’s S VIDEO terminals, and connect this unit’s S VIDEO MONITOR OUT terminal to the “S” video input of
your monitor. Otherwise, connect the composite video terminals from your video cassette recorder, video disc player, etc. to the
composite video terminals of this unit, and connect this unit’s composite MONITOR OUT terminal to the composite video input of
your monitor.
Note
If video signals are sent to both S VIDEO input and composite input terminals, the signals will be sent to their respective
output terminals independently.
ON SCREEN DISPLAYS
If you connect your video cassette recorder, video disc player, video monitor, etc. to this unit, you can take advantage of this unit’s
capability to display DSP program names and information about other various settings and adjustments on your video monitor’s
screen. This information will be superimposed over the video image.
If there is no video source connected or it is turned off, the information will be displayed over a monochromatic background.
Notes
●
If you watch a video source that is connected to both S VIDEO and composite video input terminals of this unit, signals of screen
display information are output from only the S VIDEO MONITOR OUT terminal.
●
When no video signal is input to either S VIDEO input or composite video input terminals of this unit, signals of screen display
information are output from both S VIDEO MONITOR OUT and composite MONITOR OUT terminals with a monochromatic
background.
* For the General Model, if the PAL/NTSC switch on the rear panel is set to “PAL”, nothing will be output from either S VIDEO
MONITOR OUT or composite MONITOR OUT terminal in this case.
LD player
Video cassette recorder 1 Video cassette recorder 2
Monitor TV