2 ip source guard, 3 ip source guard static binding, Figure 96 ip source guard – ZyXEL Communications GS-2750 User Manual

Page 199: Table 69 ip source guard

Advertising
background image

Chapter 24 IP Source Guard

GS-2750 User’s Guide

199

24.2 IP Source Guard

Use this screen to look at the current bindings for DHCP snooping and ARP inspection.
Bindings are used by DHCP snooping and ARP inspection to distinguish between authorized
and unauthorized packets in the network. The Switch learns the bindings by snooping DHCP
packets (dynamic bindings) and from information provided manually by administrators (static
bindings). To open this screen, click Advanced Application > IP Source Guard.

Figure 96 IP Source Guard

The following table describes the labels in this screen.

24.3 IP Source Guard Static Binding

Use this screen to manage static bindings for DHCP snooping and ARP inspection. Static
bindings are uniquely identified by the MAC address and VLAN ID. Each MAC address and
VLAN ID can only be in one static binding. If you try to create a static binding with the same
MAC address and VLAN ID as an existing static binding, the new static binding replaces the
original one. To open this screen, click Advanced Application > IP Source Guard > Static
Binding
.

Table 69 IP Source Guard

LABEL

DESCRIPTION

Index

This field displays a sequential number for each binding.

MAC Address

This field displays the source MAC address in the binding.

IP Address

This field displays the IP address assigned to the MAC address in the

binding.

Lease

This field displays how many days, hours, minutes, and seconds the

binding is valid; for example, 2d3h4m5s means the binding is still valid for

2 days, 3 hours, 4 minutes and 5 seconds. This field displays infinity if the

binding is always valid (for example, a static binding).

Type

This field displays how the Switch learned the binding.
static: This binding was learned from information provided manually by an

administrator.
dhcp-snooping: This binding was learned by snooping DHCP packets.

VID

This field displays the source VLAN ID in the binding.

Port

This field displays the port number in the binding. If this field is blank, the

binding applies to all ports.

Advertising