ZyXEL Communications GS-2750 - Manual (Page 238)

Chapter 29 DHCP
GS-2750 User’s Guide
238
Figure 126 DHCP Relay Configuration Example
29.5 Configuring DHCP VLAN Settings
Use this screen to configure your DHCP settings based on the VLAN domain of the DHCP
clients. Click IP Application > DHCP in the navigation panel, then click the VLAN link In
the DHCP Status screen that displays.
"
You must set up a management IP address for each VLAN that you want to
configure DHCP settings for on the Switch. See
Section 7.6 on page 78 for
information on how to do this.
example