Yamaha DSP-A492 - Manual (Page 20)

1
Set to the “
∞
” position.
2
Turn the power on.
3
Select the main speakers to be used.
* If you use two main speaker systems, press both the A
and B switches.
4
Set to the “0” position.
5
20
SPEAKER BALANCE ADJUSTMENT
This procedure lets you adjust the sound output level balance between the main, center, and rear speakers using the built-in test
tone generator. When this adjustment is performed, the sound output level heard at the listening position will be the same from
each speaker. This is important for the best performance of the digital sound field processor and the Dolby Pro Logic Surround
decoder.
The adjustment of each speaker output level should be done at your listening position with the remote control transmitter.
Otherwise, the result may not be satisfactory.
SPEAKERS
A
ON OFF
B
BASS TREBLE
5 5
4
3
2
l 0 l
2
3
4
5 5
4
3
2
l 0 l
2
3
4
BALANCE
5 5
4
3
2
l 0 l
2
3
4
L R
l6
20
28
40
60
l2
8
4
2
0
–dB
VOLUME
POWER
REC/PAUSE DIR B DIR A PLAY
DISC
POWER VOLUME
PLAY
PRESET A/B/C/D/E – +
TIME/
LEVEL TEST EFFECT
PROGRAM PROLOGIC ENHANCED
– +
SLEEP
TAPE A/B
ON/OFF
TUNER
CD
PHONO
DELAY/CENTER
/REAR/SWFR
2CH/6CH TV/DBS VCR V–AUX DVD/LD
REC/PAUSE DIR B DIR A PLAY
DISC
POWER VOLUME
PLAY
PRESET A/B/C/D/E – +
TIME/
LEVEL TEST EFFECT
PROGRAM PROLOGIC ENHANCED
– +
SLEEP
TAPE A/B
ON/OFF
TUNER
CD
PHONO
DELAY/CENTER
/REAR
DVD/LD VCR TV/DBS
1 2
3
l6 20
28
40
60
l2
8
4
2
0 –dB
DSP-A592 only
DSP-A492 DSP-A592
BASS
EXTENSION
ON OFF
4 4
: Provided for DSP-A592 only.
5 5
TEST
Set to the
“OFF (
)”.