English – Yamaha DSP-A492 User Manual
Page 25
25
English
1
Select the source to be recorded.
2
Play the source and then turn the VOLUME control up
to confirm the input source.
3
Begin recording on the tape deck (or MD recorder etc.)
or VCR connected to this unit.
4
DSP-A592
If the tape deck (or MD recorder etc.) is used for
recording, you can monitor the sounds being recorded
by pressing TAPE (MD) MON so that “TAPE
MONITOR” lights up on the display.
DSP-A492
If the tape deck (or MD recorder etc.) is used for
recording, you can monitor the sounds being recorded
by pressing TAPE (MD) MONITOR so that “TAPE
MON” lights up on the display.
Notes
DSP-A592
●
The settings of DSP and the VOLUME, BASS, TREBLE,
BALANCE controls and the BASS EXTENSION switch
have no effect on the material being recorded.
●
In step 1, do not make an input source selection so that
“6ch” appears on the display. Signals input to this unit’s
6CH DISCRETE INPUT DVD/LD TV/DBS terminals cannot
be recorded by a tape deck, MD recorder or VCR.
DSP-A492
●
The settings of DSP and the VOLUME, BASS, TREBLE
and BALANCE controls have no effect on the material
being recorded.
l6
20
28
40
60
l2
8
4
2
0
–dB
VOLUME
TO RECORD A SOURCE TO TAPE (OR MD)
2
l6
20
28
40
60
l2
8
4
2
0
–dB
1 4
TUNER
CD
PHONO
VIDEO AUX
TAPE (MD) MON
2CH/6CH
TUNER
CD
PHONO
TAPE (MD)
MONITOR
TUNER
CD
PHONO