Yamaha DSP-A492 - Manual (Page 33)

33
English
SPECIFICATIONS
AUDIO SECTION
Minimum RMS Output Power per Channel
Main L, R
8 ohms, 20 Hz to 20 kHz, 0.04% THD
< DSP-A592 > ............................70W+70W
< DSP-A492 > ............................65W+65W
Center
< DSP-A592 >
8 ohms, 1 kHz, 0.07% THD..................70W
< DSP-A492 >
8 ohms, 1 kHz, 0.09% THD..................65W
Rear
<
DSP-A592
>
8 ohms, 1 kHz, 0.3% THD ..........35W+35W
<
DSP-A492
>
8 ohms, 1 kHz, 0.7% THD ..........20W+20W
Maximum Power [General model only]
8 ohms, 1 kHz, 10% THD
Main L, R
<
DSP-A592
>
......................110W+110W
<
DSP-A492
>
......................100W+100W
Center
<
DSP-A592
>
.................................110W
<
DSP-A492
>
.................................100W
Dynamic Power per Channel
(by IHF Dynamic Headroom measuring
method)
< DSP-A592 >
8/6/4/2 ohms...................95/120/150/170W
< DSP-A492 >
8/6/4/2 ohms...................95/115/145/165W
DIN Standard Output Power per Channel
4 ohms, 1 kHz, 0.7% THD
[Europe model only]
< DSP-A592 > .................................110W
< DSP-A492 > ...................................95W
IEC Power
8 ohms, 1 kHz, 0.1% THD
[Europe model only]
<
DSP-A592
>
...................................85W
<
DSP-A492
>
...................................80W
Power Band Width
<
DSP-A592
>
8 ohms, 30W, 0.08% THD
..........................................10 Hz to 50 kHz
<
DSP-A492
>
8 ohms, 30W, 0.1% THD
..........................................10 Hz to 50 kHz
Damping Factor (SPEAKERS A)
8 ohms, 20 Hz to 20 kHz ..............80 or more
Input Sensitivity/Impedance
PHONO MM .....................2.5 mV/47 k-ohms
CD/TUNER/TAPE/DVD·LD/TV·DBS/VCR
........................................150 mV/47 k-ohms
6CH DISCRETE INPUT DVD/LD TV/DBS
< DSP-A592 only > .......150 mV/50 k-ohms
Maximum Input Signal
PHONO MM
1 kHz, 0.5% THD
< DSP-A592 > ..............................115 mV
< DSP-A492 > ..............................100 mV
CD/TUNER/TAPE/DVD·LD/TV·DBS/VCR
1 kHz, 0.5% THD
< DSP-A592 > (EFFECT ON) ...........2.2V
< DSP-A492 > (EFFECT OFF)..........2.5V
Output Level/Impedance
REC OUT .......................150 mV/2.5 k-ohms
PRE OUT (MAIN)
<
DSP-A592 only
>
...........2.2V/1.2 k-ohms
PRE OUT (REAR)
< DSP-A592 only > ...........1.6V/1.2 k-ohms
SUBWOOFER (EFFECT OFF)
< DSP-A592 > ...................6.0V/1.5 k-ohms
< DSP-A492 > ......................3.5V/1 k-ohms
Headphone Jack Rated Output/Impedance
Output Level (8 ohms, 0.04% THD)
< DSP-A592 > ......................................0.5V
< DSP-A492 > ....................................0.45V
Impedance
< DSP-A592 > .............................390 ohms
< DSP-A492 > .............................330 ohms
Frequency Response (20 Hz to 20 kHz)
CD/TUNER/TAPE/DVD·LD/TV·DBS/VCR
........................................................0±0.5 dB
RIAA Equalization Deviation
PHONO MM....................................0±0.5 dB
Total Harmonic Distortion (20 Hz to 20 kHz)
PHONO MM to REC OUT
1V .....................................................0.02%
CD/TUNER/TAPE/DVD·LD/TV·DBS/VCR to
SP OUT
30W/8 ohms
<
DSP-A592
>
................................0.02%
<
DSP-A492
>
................................0.03%
Signal-to-Noise Ratio (IHF-A Network)
PHONO MM to REC OUT
(5 mV Input Shorted)
< DSP-A592 >
[Europe and U.K. models]...............82 dB
[General model] ..............................85 dB
< DSP-A492 > ....................................80 dB
CD/TUNER/TAPE/DVD·LD/TV·DBS/VCR to
SP OUT (Shorted)
< DSP-A592 > ....................................99 dB
< DSP-A492 > ....................................93 dB
Residual Noise (IHF-A Network)
MAIN L/R ...........................................140 µ V
Channel Separation (Vol. –30 dB, EFFECT
OFF)
PHONO MM (Input Shorted)
< DSP-A592 >
1 kHz/10 kHz ........................60 dB/50 dB
<
DSP-A492
>
1 kHz...............................................60 dB
CD/TUNER/TAPE/DVD·LD/TV·DBS/VCR
(Input 5.1 k-ohms Terminated)
<
DSP-A592
>
1 kHz/10 kHz ........................60 dB/45 dB
<
DSP-A492
>
1 kHz...............................................60 dB
Tone Control Characteristics
BASS: Boost/cut ................±10 dB (50 Hz)
Turnover Frequency .........(350 Hz)
TREBLE: Boost/cut...........±10 dB (20 kHz)
Turnover Frequency.....(3.5 kHz)
Bass Extension
< DSP-A592 only > ..................+6 dB (50 Hz)
Gain Tracking Error (0 to –60 dB) ............3 dB
VIDEO SECTION
Video Signal Type
[Europe and U.K. models] ......................PAL
[General model] ...........................NTSC/PAL
Video Signal Level..................1 Vp-p/75 ohms
S-Video Signal Level
< DSP-A592 only >
Y ........................................1 Vp-p/75 ohms
C.................................0.286 Vp-p/75 ohms
Maximum Input Level............1.5 Vp-p or more
Signal-to-Noise Ratio ................50 dB or more
Monitor Out Frequency Response
..................................5 Hz to 10 MHz, –3 dB
GENERAL
Power Supply
[Europe and U.K. models]
..............................................AC 230V, 50 Hz
[General model]
....................AC 110/120/220/240V, 60/50 Hz
Power Consumption
<
DSP-A592
>
......................................270W
< DSP-A492 > ......................................230W
Maximum Power Consumption
(8 ohms, 1 kHz, 10% THD, When 5 channels
are driven:)
[General model only]
< DSP-A592 > .................................630W
< DSP-A492 > .................................540W
AC Outlets
3 SWITCHED OUTLETS
[General model] ................100W max. total
2 SWITCHED OUTLETS
[Europe model] .................100W max. total
1 SWITCHED OUTLET
[U.K. model] ......................100W max. total
Dimensions (W x H x D)
<
DSP-A592
>
............435 x 151 x 379.5 mm
(17-1/8” x 5-15/16” x 14-15/16”)
<
DSP-A492
>
............435 x 151 x 266.5 mm
(17-1/8” x 5-15/16” x 10-1/2”)
Weight
<
DSP-A592
>
.............11.0 kg (24 lbs. 3 oz.)
<
DSP-A492
>
...............8.7 kg (19 lbs. 2 oz.)
Accessories ...........Remote control transmitter
Batteries
Specifications are subject to change without
notice.