Yamaha RX-V561 - Manual (Page 21)

17
En
Connections
English
PRE
P
ARA
T
ION
■ Connecting to the HDMI, COMPONENT VIDEO or S VIDEO jacks
You can enjoy high-quality pictures by connecting your video monitor and video source components to this unit using
HDMI, COMPONENT VIDEO or S VIDEO connections.
Be sure to connect your video components in the same way you connect your video monitor to this unit. For example, if you connect
your video monitor to this unit using a HDMI connection, connect your video components to this unit using the HDMI connection.
HDMI connection
• When you connect your TV monitor or projector via HDMI
connection, the OSD does not appear. In such cases, connect the
TV monitor or projector via component, S-video or video
connection.
• Connect the input source components to the HDMI DVD or
HDMI DTV/CBL jack to display the video images on the video
monitor connected to the HDMI OUT jack.
• Audio/video signals output from the connected component
(such as DVD player etc.) are output to the connected video
monitor only when this unit is turned on and set to the input
source (DVD or DTV/CBL).
• Available audio/video signals depend on the specification of the
connected video monitor. Refer to the instruction manual of
each connected component.
Note
Audio signals input at the HDMI jack are not output
from any speaker terminals but output from the
connected video monitor.
To enjoy the sound from speakers connected to this
unit,
– make an analog or digital connection besides the
HDMI connection (see page 16).
– mute the volume of the connected video monitor.
Notes
CH INPUT
ENT VIDEO VIDEO
ANTENNA
AUDIO
L
R
DTV/CBL DVR CD IN OUT CENTER
SUBWOOFER
SURROUND
DVR DVD
DVD
S VIDEO
VIDEO
DVR
AM
GND
FM
UNBAL.
75
IN OUT DTV/CBL MONITOR
OUT
MONITOR
OUT
MD/
CD-R (
IN
(PLAY)
HDMI
DVD OUT DTV/CBL
Video monitor
Cable TV or
satellite tuner
DVD player