Automatic preset tuning, Manual preset tuning, A1:fm 87.5 mhz – Yamaha RX-V561 User Manual

Page 45: C3 am 630 khz

Advertising
background image

41

En

FM/AM tuning

English

BA

S

IC

OPERA

T

ION

You can use the automatic preset tuning feature to store
FM stations with strong signals up to 40 (A1 to E8: 8
preset station numbers in each of the 5 preset station
groups) of those stations in order. You can then recall any
preset station easily by selecting the preset station number.

1

Press D

INPUT l / h repeatedly so that

“TUNER” is displayed in the front panel
display.

2

Press 3

FM/AM to select “FM” as the

reception band.

3

Press and hold 6

MEMORY for more than 3

seconds.
The preset station number as well as the MEMORY
and AUTO indicators flashes. After approximately 5
seconds, automatic presetting starts from the current
frequency and proceeds toward the higher
frequencies.

When automatic preset tuning is completed, the front
panel display shows the frequency of the last preset
station.

y

You can select the preset station group and the preset station
number where the first received station will be stored by pressing
4A/B/C/D/E and then 5PRESET/TUNING l / h.

• Any stored station data existing under a preset station number is

cleared when you store a new station under the same preset
station number.

• Only FM stations with sufficient signal strength are stored

automatically by automatic preset tuning. If the station you
want to store is weak in signal strength, tune into it manually
and store it as described in “Manual preset tuning” on this page.

You can also store up to 40 stations (A1 to E8: 8 preset
station numbers in each of the 5 preset station groups)
manually.

1

Tune into a station automatically or manually.
See page 40 for tuning instructions.

2

Press 6

MEMORY.

The MEMORY indicator flashes in the front panel
display for approximately 10 seconds.

3

Press 4

A/B/C/D/E and 5PRESET/

TUNING l / h repeatedly to select a preset
station group (A1 to E8) while the MEMORY
indicator is flashing.
Check that the colon (:) appears in the front panel
display.

4

Press 6

MEMORY while the MEMORY

indicator is flashing.
The station band and frequency appear in the front
panel display with the preset station group and
number you have selected.

• Any stored station data existing under a preset station number is

cleared when you store a new station under the same preset
station number.

• The reception mode (stereo or monaural) is stored along with

the station frequency.

Automatic preset tuning

Notes

Flashes

Flash

AUTO

MEMORY

A1:FM 87.5 MHz

Manual preset tuning

Notes

TUNED

MEMORY

:

C3 AM 630 kHz

Preset station number

Flashes

The displayed station has been stored as C3.

TUNED

:

C3 AM 630 kHz

Advertising