Zephyr ZVE-E42S - Manual (Page 15)

13
Maintenance
-
Cleaning
Surface Maintenance:
Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive detergent , or steel
wool/scouring pads which will scratch and damage surface.
For heavier soil use liquid degreaser.
After cleaning, you may use non-abrasive stainless steel polish/ cleaners, to polish and buff out the stainless luster
and grain. Always scrub lightly, with clean cotton cloth, and with the grain.
Do not use any product containing chlorine bleach. Do not use “orange” cleaners.
Metal Filters
The Metal Filters fitted by the factory are intended to
filter out residue and grease from cooking. They
need not be replaced on a regular basis but are
required to be kept clean.
Filters should be cleaned after every 30 hours of
use. Use the Filter Clean Reminder function on the
controls to determine when filters require cleaning.
Remove and clean by hand or in dishwasher. Spray
degreasing detergent and leave to soak if heavily
soiled.
Dry filters and re-install before using hood.
Replacing Metal Filters
Should filters wear out due to age and prolonged
use, replace with following part number:
Also replace any damaged filter that has punctured
or broken mesh, bent or broken frame.
Hood Model: Part No. Filters in pkg.
ZVE-E30S Z0F-MO42 2
ZVE-E36S Z0F-MO43 3
ZVE-E42S Z0F-MO43 3
Metal Filter Dimensions:
16.12 in x 9.12 in
409 mm x 232 mm