Zebra 105SL - Manual (Page 109)

101 Configuration
Control Panel Parameters
6/30/06 105SL User Guide 11342L-001 Rev. A
Reset Network
2,3
This option resets the wireless card and the print server when the wireless
option is running. Selecting this option has no effect when the wireless
option is not running, when there is no card inserted, or when the wireless
password is anything other than the default (zero).
1. Press PLUS (+) to select YES .
The LCD prompts ARE YOU SURE? .
2. Do you wish to reset the network parameters?
• If no, press MINUS (–) to select NO and cancel the request.
• If yes, press PLUS (+) to select
YES
and reset the network.
Table 10 • Print Server Parameters (Page 4 of 4)
Parameter Action/Explanation
1 Appears only when the ZebraNet Wireless Print Server is installed.
2 These parameters appear after the system recognizes the existence of a ZebraNet print server (wired or wireless). After the
print server is recognized, all zeroes (000.000.000.000) will display until the printer obtains an IP address or defaults to
address 192.168.254.254.
3 If a wireless password is set, you must enter the wireless password (not the printer password) to access this parameter.
RESET NETWORK
YES