Zebra 105SL - Manual (Page 93)

85 Configuration
Control Panel Parameters
6/30/06 105SL User Guide 11342L-001 Rev. A
List All
This option prints labels that list the available fonts, bar codes, images,
formats, and the current printer and network configurations.
To print labels for all settings:
1. Press PLUS (+) to select PRINT .
Format Memory Card
This option erases all previously stored information from the optional
PCMCIA card or Compact Flash card.
Caution • This option completely erases the selected card.
To format a memory card:
1. Press MINUS (-) to select
A:
or PLUS (+) to select
B:
.
If your printer is set to require a password, you are prompted to enter
the password.
2. Enter the password. For instructions, see Change Password-Protected
Parameters
on page 76 .
3. Press the appropriate button again to select the desired card.
The display shows
ARE YOU SURE?
.
4. Do you wish to continue?
• Press MINUS (-) to select NO to cancel the request and return to
FORMAT CARD prompt.
• Press PLUS (+) to select YES and begin initialization.
When initialization is complete, the printer automatically exits Setup
mode, and the control panel displays
PRINTER READY . If you exit
Setup mode while initialization is still in process, the control panel
display flashes between the phrases
CHECKING B: MEMORY and
PRINTER IDLE .
Note • Depending on the amount of memory in the memory card,
initialization may take up to 5 minutes to complete.
Table 9 • Printer Parameters (Page 7 of 19)
Parameter Action/Explanation
LIST ALL
PRINT
FORMAT CARD:
A: B: