User 1, User 3, Specifying track recording – Yamaha YPT-320 EN User Manual

Page 39

Advertising
background image

Record your own performance

PSR-E323/YPT-320 Owner’s Manual

39

Ref

erence

1

Turn ACMP (auto accompaniment) on or off, depending
on what you want to record.

If you want to record Style playback, turn ACMP on. If you want to
record only your own keyboard performance, turn ACMP off.

2

Specify the track you want to record.

Specify the track 2 when you want to record the Style.
When you want to record your own keyboard performance, you can
specify either track.

Recording to Track 1

While holding the [REC] button, press the [REC TRACK 1] but-
ton.

Recording to Track 2

While holding the [REC] button, press the [REC TRACK 2] but-
ton.

3

Press the [+], [-] buttons to select the User Song you
want to record.

If you want to record Style playback to Track 2, press the [STYLE]
button and select the desired Style.

4

Start recording

Perform steps

2

and

3

on pages 37–38.

By playing keys to the left of the Split Point when the Auto Accompa-
niment is set to on, the Style starts sounding and is recorded. Only your
performance is recorded by playing the keyboard (any key is OK)
when the Auto Accompaniment is set to off.

Specifying track recording

• Keep in mind that both Tracks

1 and 2 will be overwritten
with new data if you record
without specifying the tracks.

• The both “L” and “R” flashes,

this indicates that you have
specified Track 1 when the
Auto Accompaniment is on. If
you want to record your own
performance, press the
[TRACK 2] button to stop the
“L” flashing. If you want to
record a Style, press the
[REC] button to cancel the
recording, and repeat the pro-
cedure from the beginning.

NOTE

User 1

rEC

001

Flashes when track 1 is
selected for recording.

Press simultaneously

User 1

rEC

001

Flashes
when track 2
is selected
for recording.

Lights when recorded data exists.
Turns off when there is no recorded data, or when Mute
is set to on (page 51) to turn off playback of the track.

Press simultaneously

User 3

rEC

• If you want to record only the

rhythm (percussion) part,
press the [START/STOP] but-
ton to play just the rhythm,
then add the section change
by pressing the [INTO/END-
ING/rit.] button or [MAIN/
AUTO FILL] button.

• You can record a new track

while listening to a previously
recorded track (the track indi-
cation will appear). You can
also mute recorded tracks
(the track will disappear)
while recording a new track
by pressing the desired track
button.

NOTE

Advertising