Yamaha YPT-320 EN - Manual (Page 41)

PSR-E323/YPT-320 Owner’s Manual
41
Ref
erence
Initialization
Initialization
This function erases all backup data in the instrument’s flash memory and
restores the initial default settings. The following initialization procedures
are provided.
Turn the power on by pressing the [STANDBY/ON] switch while holding
the highest white key on the keyboard. The backed up data will be erased
and the default values restored.
Initialization does not delete the files transferred from the computer. If you
want to delete the files, see “Deleting Files” below.
To clear Song data and Style data that has been transferred to the internal
flash memory from a computer, simultaneously hold down the highest
white key and the three highest black keys on the keyboard and turn the
power on by pressing the [STANDBY/ON] switch.
Deleting Files
• When you execute the Ini-
tialization, backup param-
eters will be cleared.
CAUTION
Although the above parameters are always backed up, and are maintained even
when the power is turned off, they will be completely erased by the initialization.
You can save the settings as backup data to your computer, by using the
Musicsoft Downloader (MSD) software. Refer to the section “Transferring a
backup file from the PSR-E323/YPT-320 to a computer” on page 62.
● Parameters that are saved in backup:
• User Songs
• Style number 107
• Touch Response on/off setting
• Passing status of Song and Step
• The following Function settings: Tuning, Split Point, Touch Sensitivity,
Style Volume, Song Volume, Metronome Volume, Demo
Cancel, Panel Sustain
• When you delete the files,
Song data and Style data
you have purchased and
downloaded will also be
cleared. Make sure to
save your important data
by transferring to a com-
puter using Musicsoft
Downloader (page 62).
CAUTION