Yamaha YPT-320 EN - Manual (Page 44)

Voice Settings
44
PSR-E323/YPT-320 Owner’s Manual
Ref
erence
Adding Panel Sustain
This function adds a fixed sustain to the key-
board Voices.
1
Press the [FUNCTION] button a number of
times until the “Sustain” item appears.
2
Press the [+] button to turn the Panel Sustain
on.
Panel Sustain will be added to the notes you
play on the keyboard when the Panel Sustain
is on. To turn it off, press the [-] button.
Touch Response Sensitivity
Press the [TOUCH] button to turn Touch
Response on. When Touch Response is on, you
can control the volume of notes according to
how hard you play the keys. Touch Response is
normally on. Press the [TOUCH] button again to
turn the Touch Response off. When Touch
Response is off, the same volume will be pro-
duced no matter how hard you play the keys.
When Touch Response is on, you can adjust the
sensitivity of the keyboard in response to key-
board dynamics in three steps. Higher values
produce greater (easier) volume variation in
response to keyboard dynamics—in other words,
greater sensitivity.
1
Press and hold the [TOUCH] button for
longer than a second.
“TouchSns” appears in the display for a few
seconds, followed by the current Touch Sen-
sitivity value.
2
Select a Touch Sensitivity setting between 1
and 3 by using the number buttons [0]–[9],
[+], [-].
Sustain
oFF
Current setting
Sustain
on
On
• See the section “Connecting a footswitch” on page 9 for infor-
mation on applying sustain with the optional footswitch.
NOTE
Touch Response
Setting the Touch Sensitivity
Appears when Touch
Response is on.
ndPno
• The Touch Response function cannot be used for some Voices
(such as organ), even if the Touch Response icon appears in
the display.
NOTE
Currently selected Touch Sensitivity
Medium
2