Safety and energy saving functions, Safety cut-off function, Child safety function – Zanussi ZBM 879 User Manual

Page 11: Residual heat function

Advertising
background image

11

To programme the Oven to

switch on and off

1) Carry out the cooking duration setting as described

in “To programme the Oven to switch off”.

2) Press button

. The "End of Cooking" function will

be selected, and the relevant pilot lamp will flash.

The control panel will display the end of cooking time

(that is, the actual time + cooking duration).

3) Press button or within 3 seconds to select the

required end of cooking time.

4) The programmer will wait 3 seconds, then the cooking

duration time will appear on the control panel. When

the oven switches on, the display will revert to the

time of day.
If you press button

the display will show the end

of cooking time.

5) The oven will switch on and off automatically. The end

of cooking will be marked by an acoustic alarm.

6) To switch off the acoustic alarm, press any button

between 4 and 9. The pilot lamps will go off.

To cancel the programme, simply cancel the

Duration Time.
Press button

and, while keeping it pressed,

press button too.

If this operation is carried out while a program is

running on, the oven will NOT switch off.

F

F

Safety Cut-Off Function

If no changes are made to the oven settings, the oven will

switch off automatically according to the following table:

If temperature setting is: the oven will switch off:

250°C or more after 1

1

/

2

hours

from 120 up to 250°C after 5 hours

less than 120°C after 12 hours

Child Safety Function

To avoid children switching on the oven, it is possible to

lock the oven controls.
1) Turn off the oven by pressing button .
2) Press buttons

and at the same time and keep

them pressed for about 3 seconds. A flashing dot will

be displayed after the time of day.

3) The oven is now locked. Neither oven functions nor

temperatures can be selected.

To unlock the oven:
Press buttons

and at the same time and

keep them pressed for about 3 seconds. The

flashing dot will go off. The oven can now be

operated.

Safety and Energy Saving Functions

F

F

Residual Heat Function

When a Cooking Duration time is set, the oven will

automatically switch off a few minutes before the end of

the programmed time, and use the residual heat to finish

your dishes without energy consumption. The oven pilot

light will remain on until the Cooking Duration time is over.

This function will not operate when the Cooking Duration

time is less than 15 minutes.

Advertising