Zanussi ZBM 879 - Manual (Page 27)

27
Building In
Please ensure that when the oven is
installed it is easily accessible for the
engineer in the event of a breakdown.
The surround or cabinet into which the oven
will be built must comply with these
specifications:
l
the dimensions must be as shown in the
relevant diagrams;
l
the materials must withstand a tempera-
ture increase of at least 60°C above
ambient;
l
proper arrangements must be made of a
continuous supply of air to the oven to
prevent the oven overheating.
Dimensions of the oven and recess required
are given in the relevant diagrams.
FO 0290
FO 0374
FO 0292
Securing The Oven To
The Cabinet
1) Fit the appliance into the cabinet
recess, open the oven door and
unscrew the two upper screws of
the door hinge.
2) Slightly slide forward the door in
order to disengage it from the
upper hinge.
3) Lift the oven door to disengage it
from the lower hinge slipping of the
pivot.
4) Secure the oven to the kitchen
cabinet with four wood screws
which fit the holes provided in the
oven frame. Reassemble the oven
door carrying out the above pro-
cedure in reverse.
F
A
A
B
1
2
3 4