Yashica 635 - Manual (Page 12)

5. Insert the Spool Stud
Adapter into the spool
spindle of the Film Cassette.
6. Place the Film Cassette in
the lower Film Chamber by
pulling out the Spool Stud
Knob as illustrated. Then,
pull out the film leader
gently.
7. Set the 35 mm Take-up Spool in the upper Film
Chamber. First, fit the cut-out on the right into the
right spool stud. Then, while pulling out the 35
mm Film Advance Knob (Spool Stud Knob), set
the spool into position. Reset the Film Advance
Knob to its original position and wind it until it
locks automatically.
8. Insert the film leader into the slot on the Take-
up Spool and, after pressing the 35 mm Film-stop
Release located directly below the Film Rewind
Release Button (R), wind the 35 mm Film
Advance Knob.
9. After making sure the perforations on the film
properly engage the sprocket teeth, set the
Pressure Plate by matching the Guide Pins with
the Guide Sockets and pressing it firmly against
the 35 mm Picture Frame.