Yashica 635 User Manual
Page 6
7. To lock the Back Cover, press it against
the camera body and turn the Back Cover
Release Ring in the direction of "C"
(Close).
8. In the course of film loading, the
Exposure Counter automatically resets to
"S" (start) position.
9. Therefore, wind the Film Advance
Knob until the figure "1" appears in the
Exposure Counter Window.
10. After making an exposure, push the
Film-stop Release (20) and wind the Film
Advance Knob. The Exposure Counter
will register the number of exposed
frames and the Film Advance Knob will
lock automatically.
EXPOSURE SETTING AND SHUTTER
RELEASE
1. Turn the Shutter Speed Control Wheel
(right) and Aperture Control Wheel (left) in
either direction with your thumbs and
position the desired settings in the Shutter
Speed/Lens Aperture Indicator Window.
2. Make sure the shutter speed setting is
aligned properly with the indicator stub on
the window frame. As for the aperture
setting, it can be set at any in between
settings, as required.
3. Push the Shutter Cocking Lever all the
way down. To make exposure, press the
Shutter Release Button gently.
CAUTION: Avoid resetting the shutter
speed after the Shutter Cocking Lever is
pushed all the way down.