36 english – Yamaha CLP-220 User Manual

Page 36

Advertising
background image

CLP-220

Keyboard Stand Assembly

36

ENGLISH

7.

Set the voltage selector and connect the
power cord.

Voltage Selector

Before connecting the AC power cord, check the setting
of the voltage selector which is provided in some areas.
To set the selector for 110V, 127V, 220V or 240V main
voltages, use a “minus” screwdriver to rotate the selector
dial so that the correct voltage for your region appears
next to the pointer on the panel. The voltage selector is
set at 240V when the unit is initially shipped. After the
proper voltage has been selected, connect the AC power
cord to the AC INLET and an AC wall outlet. A plug
adaptor may be also provided in some areas to match the
pin configuration of the AC wall outlets in your area.

WARNING

An improper voltage setting can cause serious
damage to the Clavinova or result in improper
operation.

8.

Set the adjuster.

9.

Attach the headphone hanger.
Use the included two screws 5 (4x10mm) to attach
the hanger as shown in the illustration below.

After completing the assembly, please
check the following.

When moving the Clavinova after assembly, always
hold the bottom of the main unit.

CAUTION

Do not hold the key cover or top portion. Improper
handling can result in damage to the Clavinova or
personal injury.

AC INLET

240

127

110

220

Rotate the adjuster until it comes in firm contact with the
floor surface.

PHONES

• Are there any parts left over?

➝ Review the assembly procedure and correct any

errors.

• Is the Clavinova clear of doors and other mov-

able fixtures?

➝ Move the Clavinova to an appropriate location.

• Does the Clavinova make a rattling noise when

you shake it?

➝ Tighten all screws.

• Does the pedal box rattle or give way when you

step on the pedals?

➝ Turn the adjuster so that it is set firmly against

the floor.

• Are the pedal and power cords inserted securely

into the sockets?

➝ Check the connection.

• If the main unit creaks or is otherwise unsteady

when you play on the keyboard, refer to the
assembly diagrams and retighten all screws.

Key cover

Top portion

Hold here.

Do not
hold here.

34

Advertising