Xantrex Technology FREEDOM SW 3000 - Manual (Page 36)

22 Freedom SW 3000 Owner’s Guide
Operating The Freedom SW 3000
System Modes
This section provides an overview of the two different system modes.
The system modes described in this section affect the performance and
behavior of the Freedom SW 3000 and all other Xanbus-enabled devices on
the Xanbus system. You will have to change the system mode when
travelling or when installing a Xanbus-enabled device. When you store
your unit for a prolonged period of time, it is recommended to disconnect
all sources of power.
You can change system modes using the System Settings menu on the SCP.
You can also use the red System button on the SCP to put the SCP and all
other Xanbus-enabled devices into Safe mode only.
System modes are changed using the System Settings menu. The two
system modes are:
• Operating and
• Safe
Please read the section about each system mode to find out which mode is
appropriate for different conditions or situations.
Operating
Characteristics In Operating mode, all communications are enabled on
the Xanbus system. All power conversion functions are enabled. Each
Xanbus-enabled device is monitoring and communicating its input.
The basic state of the SCP is Operating mode. In Operating mode, the SCP
communicates with other Xanbus-enabled devices and displays all the
network information which it is configured to display.
Whenever the SCP or any other device on the Xanbus system is powered on
or reset, it will be in Operating mode.
Figure 8 SCP System Button
System Button
Figure 9 Operating Mode