Pioneer CDJ-500II - Manual (Page 11)

11
En
<DRB1223>
[Using the Jog dial]
Press PLAY/PAUSE during playback, and rotate the
Jog dial in pause mode.
÷ Rotating the jog dial clockwise initiates search in
the forward direction and rotating it counterclock-
wise initiates search in the reverse direction.
÷ One rotation of the jog dial searches by 75 frames.
÷ The audio of normal playback can be heard when
the jog dial is rotated at a speed between 0.8 and
1.2 revolutions per second (rps).
[Using the SEARCH buttons (
1, ¡ )]
Press the SEARCH buttons ( 1 or ¡ ) in pause
mode moves in the specified direction by one frame
per press.
To search for a particular frame Switching ON/OFF of the Auto Cue
function
When the TIME MODE/AUTO CUE button is kept
pressed for more than 1 second, the Auto Cue function
is set to ON or OFF.
When the Auto Cue function is set to ON, the AUTO
CUE indicator in the display window lights up.
BASIC OPERATION
Playback operation using the auto cue
function
1 Press the EJECT button.
2 Load a disc.
÷ Place a disc correctly centered in the disc
compartment with the label side up. With a 3-
inch (8 cm) disc, place the disc in the groove of
the 3-inch (8 cm) disc guide correctly.
÷ Do not place more than one disc in the disc
compartment.
3 Push the door in to close.
4 Press the PLAY/PAUSE button.
÷ Press the PLAY/PAUSE button after the CUE
indicator lights.
7 When the selection is finished playing, the player
searches for the beginning of the next selection to
be played. The CUE indicator lights up and the
6
indicator blinks, and the player enters playback
standby mode.
The next selection is played immediately by pressing
the PLAY/PAUSE button.
APPLICATION OPERATION
To search for a particular passage
[Using the SEARCH buttons ( 1, ¡ )]
While
¡ is kept pressed, playback rapidly advances
toward the end of the disc. While
1 is kept pressed,
playback rapidly reverses toward the beginning of the
disc.
[Using the Jog dial]
If the Jog dial is rotated more than 2 rps in playback
mode, playback advances or reverses with the sound.
The setting of the cue point
If the cue point is memorized in the player, the player
enters playback standby mode at the cue point by
pressing the CUE button.
1 During playback, search for the cue point while
listening to the playback sound by pressing the
SEARCH buttons (
1, ¡ ) or while watching
the PLAYING ADDRESS display in the display
window.
Press PLAY/PAUSE so that the player enters
pause mode.
2 Rotate the Jog dial slowly to search for the
desired point precisely.
÷ To set the cue point while listening to the
playback sound, release the Jog dial when the
desired sound is heard and return to the point
just before the desired point. (The point just
behind where the Jog dial was released is set as
the cue point.)
3 Press the CUE button when the frame number
or playback has reached the desired point.
÷ Cue point memory is completed when the play-
back is muted and the CUE indicator lights up.
÷ The last stored cue point is cleared when a new
cue point is memorized.
÷ To set the cue point
memorizes in
the player
Press the CUE button
in pause mode.
playback direction