Yamaha DVX-700 - Manual (Page 21)

17
En
Eng
lish
CONNECTIONS
2
■ Connecting a TV
Notes
– You only need to make one video connection from
the following options (A or B), depending on the
capabilities of your TV.
– Do not connect the power cables until all cable
connections are completed.
COMPONENT VIDEO OUTPUT jacks
<A>
Use the component video cables (Green/Blue/Red, not
supplied) to connect the DVD controller’s Y P
B P R jacks
to the corresponding component video input jacks (or the
Y P
B /C B P R /C R YUV jacks) on your TV.
Progressive scan video quality is only available when
using Y P
B P R in conjunction with a progressive scan TV.
To activate the progressive scan function, refer to
“Selecting the output type for COMPONENT VIDEO
OUTPUT jacks” on page 24.
VIDEO OUTPUT jack <B>
Use the Video pin cable (yellow-supplied) to connect the
DVD controller’s VIDEO OUTPUT jack to the video
input jack (or A/V In/Video In/Composite/Baseband jack)
on your TV.
OTHER CONNECTIONS
<A> <B>
SYSTEM
CONNECTOR
NS-PSW700 VIDEO
COMPONENT
P R
VIDEO
OUTPUT
Y
P B
TV
DVD controller