Yamaha DPX-1 - Manual (Page 24)

E- 21
English
MENU
Menu operation
■ Basic submenu operation
[Operation groups A and B]
1. Select the menu item to be adjusted by following
steps 1—3 in “Basic menu operation”.
The submenu mark “ ” appears on the right side of the item.
2.
Press the SELECT or + button to open the submenu.
IMAGE SIGNAL INITIAL SETUP
COLOR SYSTEM AUTO
COMPONENT
RGB PC
ENGLISH
2H.
INPUT A SIGNAL
INPUT B SIGNAL
LANGUAGE
POWER SAVING
LAMP RUNNING TIME
RESET
MEMORY1 VIDEO
OFF ON
SELECT
SELECT
Remote control
or
Control panel
IMAGE SIGNAL INITIAL SETUP
ENGLISH
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
LANGUAGE
ESCAPE: EXIT MEMORY1 VIDEO
3. Select the submenu parameter by pressing the h or g
button.
Press the RESET button to reset the parameter to the factory
setting. (Items without a factory setting cannot be reset.)
When setting “COLOR SYSTEM”, “INPUT A SIGNAL”,
“INPUT B SIGNAL”, or “R/C SENSOR”, the following step
[Operation group B only] is necessary.
[Operation group B only]
Press the SELECT button to confirm the new setting and close
the submenu. Setting cannot be changed for the above items if
not confirmed by the SELECT button.
To reset the parameter to the factory setting, press the RESET
button when the submenu has been opened.
4. Press the MENU button to close the menu.
Press the ESCAPE or – button to return to the previous screen
if continuing to adjust settings.
SELECT
Remote control
or
Control panel
ENGLISH
DEUTSCH
ESPAÑOL
FRANÇAIS
ITALIANO
VIDEO
BILD SIGNAL EINST. AUFST.
SPRACHE
SPEICHER1 ESCAPE: VERLASSEN
SELECT
SELECT
Remote control
or
Control panel
MENU
MENU
Remote control
or
Control panel