Yamaha CVP-409 - Manual (Page 54)

Quic
k Guide
CVP-409/407 Owner’s Manual 54
Singing Along with Song Playback (Karaoke) or
Your Own Performance
Connect a microphone to the instrument and sing along with Song playback (Karaoke) or your own perfor-
mance.
The lyrics can be displayed when the Song contains lyric data. Sing with the microphone as you read the lyr-
ics shown in the display. Lyrics can also be displayed with the music score, letting you play and sing while fol-
lowing along with the notation and lyrics.
Connecting a Microphone
n Always set the INPUT VOLUME to minimum when nothing is con-
nected to the [MIC/LINE IN] jack. Since the [MIC/LINE IN] jack is
highly sensitive, it may pick up and produce noise when nothing is
connected.
Adjust the controls while checking the SIGNAL and OVER lamps. The SIGNAL
lamp lights to indicate that an audio signal is being received. Make sure to
adjust the INPUT VOLUME so that this lamp is light. The OVER lamp lights
when the input level is too high. Make sure to adjust the INPUT VOLUME so
that this lamp does not light.
Disconnecting the microphone
1
Set the [INPUT VOLUME] knob on the bottom panel of the instrument to the minimum position.
2
Disconnect the microphone from the [MIC./LINE IN] jack.
n Set the [INPUT VOLUME] knob to the minimum position before turning off the power.
1
Make sure you have a conventional dynamic microphone.
2
Set the [INPUT VOLUME] knob on the bottom panel of the instrument to the minimum
position.
3
Connect the microphone to the [MIC./LINE IN] jack.
MIN MAX
INPUT MIC. MIC. LINE PHONES VOLUME LINE IN
2, 5
4 3
4
Set the [MIC. LINE] switch to “MIC.”
5
(For microphones having a power source, turn on the power first.) Adjust the [INPUT
VOLUME] knob while singing into the microphone.