Yamaha CVP-409 - Manual (Page 89)

Editing the Volume and Tonal Balance (MIXING CONSOLE)
CVP-409/407 Owner’s Manual 89
Using, Creating and Editing
V
oices
2
Use the TAB [√][®] buttons to call up the relevant setting display.
For information on the available parameters, see the section “Adjustable
items (parameters) in the MIXING CONSOLE displays” on page 90.
3
Press the [MIXING CONSOLE] button repeatedly to call up the MIX-
ING CONSOLE display for the relevant parts.
The MIXING CONSOLE displays actually consist of several different
part displays. The part name is indicated at the top of the display. The
various MIXING CONSOLE displays alternate among the following:
PANEL PART display
→ STYLE PART display → SONG CH 1–8 display →
SONG CH 9–16 display
4
Press one of the [A]–[J] buttons to select the desired parameter.
5
Use the [1π π π π† † † † ]–[8π π π π† † † † ] buttons to set the value.
6
Save your MIXING CONSOLE settings.
• Saving the PANEL PART display settings
Register them to Registration Memory (page 131).
• Saving the STYLE PART display settings
Save them as Style data.
1 Call up the operation display.
[FUNCTION] → [F] DIGITAL REC MENU → [B] STYLE CREATOR
2 Press the [EXIT] button to close the RECORD display.
3 Press the [I] (SAVE) button to call up the Style Selection display for sav-
ing your data, then save it (page 69).
• Saving the SONG CH 1–8/9–16 display settings
First register the edited settings as part of the Song data (SET UP), then save
the Song.
See the SONG CREATOR
→ CHANNEL display → SETUP item explana-
tion on page 162.
About Parts
See below.
Instantly setting all parts to
the same value
Once you’ve selected a parame-
ter in step 4, you can instantly
set the same value to all other
parts. To do this, simultaneously
hold down one of the [A]–[J] but-
tons, and use the [1]–[8] buttons
or the [DATA ENTRY] dial.
About Parts
PANEL PART
In the PANEL PART display of the MIXING CONSOLE, you can indepen-
dently adjust the level balance among the Keyboard parts (RIGHT 1, RIGHT
2 and LEFT), SONG, STYLE, and MIC parts. The part components are the
same as those that appear in the display when you press the panel [BAL-
ANCE] button (page 40).
STYLE PART
A Style consists of eight separate channels. Here you can adjust the level
balance among these eight channels or parts. These part components are the
same as those that appear in the display when you press the panel [CHAN-
NEL ON/OFF] button to call up the STYLE display.
SONG CH 1–8/9–16
A Song consists of sixteen separate channels. Here you can adjust the level
balance among these sixteen channels or parts. These part components are
the same as those that appear in the display when you press the panel
[CHANNEL ON/OFF] button to call up the SONG display.