Yamaha TSS-15 - Manual (Page 12)

10
The following diagram shows how to connect your components to the TSS-15.
■ Audio Inputs
The TSS-15 has four audio inputs. Inputs 1, 2, and 3 accept
digital audio signals. Input 4 accepts analog audio signals.
1
DIGITAL INPUT 1
Use the supplied optical digital audio cable to connect
the digital audio output of a DVD player, etc., to this
optical digital input.
2
DIGITAL INPUT 2
Use an optical digital audio cable (sold separately) to
connect the digital audio output of a TV, etc., to this
optical digital input.
3
DIGITAL INPUT 3
Use a coaxial digital audio cable (sold separately) to
connect the digital audio output of a CD player, etc., to
this optical digital input.
4
ANALOG INPUT 4
Use the audio cable to connect the analog audio output
of a VCR, etc., to this analog input.
Notes:
• You can connect your computer to ANALOG INPUT 4
by using a mini plug to RCA conversion cable, or an
adaptor.
• Since the TSS-15 doesn’t have any video inputs and out-
puts, connect the video output from your DVD player or
VCR directly to your TV.
Connecting Your Other Components
L
R
FRONT
SPEAKER
OUTPUTS
DC IN 15V
L
R
SURROUND
L
R
DIGITAL
ON
OFF
INPUT
VIRTUAL
ANALOG
CENTER
SUBWOOFER
2
3
1
OPTICAL
DIGITAL
OUTPUT
OPTICAL
DIGITAL
OUTPUT
OUTPUT
L
R
COAXIAL DIGITAL
OUTPUT
NATURAL SOUND HOME THEATER SYSTEM TSS-15
1 - 6 - 4 - 2 0 + 2 + 4 + 6
1 2 3 4
2 3 4 5 6 7 DTS MAIN /SUB
I N P U T
NIGHT
MOVIE MUSIC
MOVIE MUSIC SPORTS GAME
M O D E I N P U T
STANDBY/ON
VOLUME
AUTO q Digital q Pro Logic
SILENT CINEMA
AAC
4
3
2
1
Dust cap
Before connecting an opti-
cal digital cable, remove
the dust cap, as shown.
Keep the cap for future
use. To keep out dust, refit
the cap when the jack is
not being used.
TSS-15
Rear panel
Audio cable
Optical cable
Coaxial cable
(sold separately)
VCR, etc
CD player, etc
TV, set-top box
(digital satellite,
cable, over the air),
etc
DVD player,
games console,
etc
Optical cable (sold separately)
Input jacks