Yamaha TSS-15 - Manual (Page 2)

1 To assure the finest performance, please read this manual
carefully. Keep it in a safe place for future reference.
2 Install this sound system in a well ventilated, cool, dry, clean
place with at least 20 cm on top, 10 cm on the left and right,
and 10 cm at the back of the amplifier unit — and away from
direct sunlight, heat sources, vibration, dust, moisture, and/or
cold.
3 Locate this system away from other electrical appliances,
motors, or transformers to avoid humming sounds. To prevent
fire or electrical shock, do not place this system where it may
be exposed to dripping or splashing, and never put any objects
filled with liquids, such as vases, on top of the system.
4 Do not expose this system to sudden temperature changes from
cold to hot. Do not locate this system in an environment with
high humidity (i.e., a room with a humidifier) to prevent
condensation inside this system, which may cause electrical
shock, fire, damage to this system, and/or personal injury.
5 Avoid installing this system in a place where foreign objects
or liquid might fall. Otherwise, fire, damage to the system,
and/or personal injury may result. Do not place the following
objects on this system:
– Other components, as they may cause damage and/or
discoloration of the surface of the system.
– Burning objects (i.e., candles) as they may cause fire,
damage to the system, and/or personal injury.
– Containers of liquid, as they may leak or spill and cause
electrical shock to the user and/or damage to this system.
6 Do not cover this system with a newspaper, tablecloth,
curtain, etc. in order not to obstruct heat radiation. If the
temperature inside this system rises, it may result in fire,
damage to the system, and/or personal injury.
7 Do not plug this system into a wall outlet until all
connections are complete.
8 Do not operate this system upside-down. It may overheat,
possibly causing damage.
9 Do not use excessive force on switches, knobs, and/or cables.
10 When disconnecting the power cable from a wall outlet,
grasp the plug; do not pull the cable.
11 Do not clean this system with chemical solvents; they might
damage the finish. Use a clean, dry cloth.
12 Only the voltage specified on this system may be used. Using
this system with a voltage higher than specified is dangerous
and may cause fire, damage to the system, and/or personal
injury. YAMAHA will not be held responsible for any
damage resulting from use of this system with a voltage other
than specified.
13 To prevent damage by lightning, disconnect the power cable
from the wall outlet during an electrical storm.
14 Take care of this system to prevent foreign objects and/or
liquid drops from entering the system.
15 When using a humidifier, avoid condensation inside the
system by allowing sufficient space around the system. Avoid
excess humidification. Condensation might cause a fire,
damage to the system, and/or electric shock.
16 Do not attempt to modify or fix this system. Contact qualified
YAMAHA service personnel when any service is needed.
The cabinet should never be opened for any reason.
17 When not planning to use this system for a long period of
time (i.e., vacation), disconnect the AC power plug from the
wall outlet.
18 Be sure to read the “Troubleshooting” section for
information on common operating errors before concluding
that this system is faulty.
19 Before moving this system, press STANDBY/ON to place
the system in standby mode, and disconnect the AC power
plug from the wall outlet.
20 Be sure to only use the AC adaptor (LSE9802B1540)
included with this system. Otherwise, you might cause a fire
or damage to this system.
■
For U.K. customers
If the socket outlets in the home are not suitable for the plug
supplied with this appliance, the plug should be removed and an
appropriate 3-pin plug fitted. For details, refer to the instructions
below.
Note
A plug severed from the mains lead must be destroyed, as a plug
with bared flexible cord is hazardous if engaged in a live socket
outlet.
■
Special Instructions for U.K. Model
CAUTION: READ THIS BEFORE OPERATING YOUR SYSTEM.
• This system is not fully disconnected from the AC power
source as long as it is connected to a wall outlet, even if the
system is turned off. This state is called Standby mode. In
Standby mode, the system consumes a very small amount
of power.
• Do not install the system in a horizontal orientation as this
may cause damage or malfunction.
• This system is designed for use in a home. Do not attempt
to install it in an automobile. Doing so may cause damage
or malfunction.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR
MOISTURE.
IMPORTANT
THE WIRES IN MAINS LEAD ARE COLOURED IN
ACCORDANCE WITH THE FOLLOWING CODE:
Blue: NEUTRAL
Brown: LIVE
As the colours of the wires in the mains lead of this apparatus
may not correspond with the coloured markings identifying
the terminals in your plug, proceed as follows:
The wire that is coloured BLUE must be connected to the
terminal that is marked with the letter N or coloured BLACK.
The wire that is coloured BROWN must be connected to the
terminal that is marked with the letter L or coloured RED.
Making sure that neither core is connected to the earth
terminal of the three-pin plug.
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.