Yamaha TSS-15 - Manual (Page 5)

3
English
■
Front Panel
1
Status, volume & level indicators
These are multipurpose indicators. Normally, they
work as status indicators, indicating input signal format
(Dolby Digital, DTS, etc) or Pro Logic II listening
mode. When the VOLUME control is adjusted, they
indicate the volume level setting from 1 through 7.
After several seconds, they revert to status indicators,
and work as explained below. They’re also used when
adjusting individual speaker levels with the test tone
(–6, –4, –2, 0, +2, +4, +6).
• AAC indicator (general model only)
This indicator lights up when an AAC signal is input.
• DTS indicator
This indicator lights up when a DTS signal is input.
• Dolby Digital indicator
This indicator lights up when a Dolby Digital signal
is input.
• MAIN/SUB indicator
When listening to a multilingual TV program, this
indicator lights up green when the main language is
selected, and lights up red when the sub-language is
selected. Main and sub are selected by using the
remote control’s [DUAL MONO] button.
• MOVIE indicator
This indicator lights up when the Dolby Pro Logic II
Movie listening mode is selected.
• MUSIC indicator
This indicator lights up when the Dolby Pro Logic II
Music listening mode is selected.
• AUTO indicator
This indicator lights up when the Auto listening mode
is selected.
2
INPUT 1–4 indicators
These indicators show which input is currently
selected.
3
NIGHT indicator
This indicator lights up when the Night listening mode
is selected (see page 15).
4
MOVIE, MUSIC, SPORTS & GAME buttons
These buttons are used to select the Movie, Music,
Sports, and Game Cinema DSP listening modes. The
button for the selected mode lights up (see page 14).
5
MODE button
This button is used to select the following listening
modes: Dolby Pro Logic II Movie, Dolby Pro Logic II
Music, or Auto (see page 15). It can also be used to
cancel the Cinema DSP listening modes.
6
INPUT button
This button is used to select inputs 1 through 4 (see
page 12).
7
STANDBY/ON button
This button is used to set the TSS-15 to On or Standby
(see page 12).
Note:
While on Standby, the TSS-15 consumes a small
amount of power so that it’s able to receive commands
from the remote control.
Getting to Know the TSS-15
NATURAL SOUND HOME THEATER SYSTEM TSS-15
SILENT CINEMA
1
- 6 - 4 - 2 0 + 2 + 4 + 6
1 2 3 4
2 3 4 5 6 7
DTS
MAIN
/SUB
I N P U T
NIGHT
MOVIE MUSIC
MOVIE MUSIC SPORTS GAME
M O D E I N P U T
STANDBY/ON
VOLUME
AUTO q Digital
q Pro Logic 1
2
3
4
5
9
6
7
8
0
AAC
(general model)
1
- 6 - 4 - 2 0 + 2 + 4 + 6
2 3 4 5 6 7
DTS
MAIN
/SUB MOVIE MUSIC AUTO q Digital
q Pro Logic
AAC
Status indicators
Volume and level indicators