Explosive gas precautions, Precautions when working with batteries – Xantrex Technology 3000 User Manual

Page 6

Advertising
background image

Safety

vi

975-0128-01-01

Explosive gas precautions

1. Working in the vicinity of lead-acid batteries is dangerous. Batteries

generate explosive gases during normal operation. Therefore, you
must read this guide and follow the instructions exactly before
installing or using your XPower Inverter 3000 Plus.

2. This equipment contains components which tend to produce arcs or

sparks. To prevent fire or explosion, do not install the XPower
Inverter 3000 Plus in compartments containing batteries or flammable
materials, or in locations that require ignition-protected equipment.
This includes any space containing gasoline-powered machinery, fuel
tanks, as well as joints, fittings, or other connections between
components of the fuel system.

3. To reduce the risk of battery explosion, follow these instructions and

those published by the battery manufacturer and the manufacturer of
the equipment in which the battery is installed.

Precautions When Working With Batteries

1. Follow all instructions published by the battery manufacturer and the

manufacturer of the equipment in which the battery is installed.

2. Make sure the area around the battery is well ventilated.
3. Never smoke or allow a spark or flame near the engine or batteries.
4. Use caution to reduce the risk or dropping a metal tool on the battery.

It could spark or short circuit the battery or other electrical parts and
could cause an explosion.

WARNING: Explosion hazard

WARNING: Explosion or fire hazard

XPower3000.book Page vi Wednesday, December 10, 2003 6:52 AM

Advertising