Yamaha HTR-5960 - Manual (Page 29)

25
CONNECTIONS
PREP
ARA
TION
This unit has more than enough power for any home use. However, if you want to add more power to the speaker output
or if you want to use another amplifier, connect an external amplifier to the PRE OUT jacks.
Do not connect this unit or other components to the AC power supply until all connections between
components are complete.
• When you make connections to the PRE OUT jacks, do not make connections to the SPEAKERS terminals.
• Set the volume level of the external amplifiers connected to the PRE OUT jacks to the maximum.
• The signals output at the FRONT PRE OUT and CENTER PRE OUT jacks are affected by the TONE CONTROL settings (see
page 39).
• If SPEAKERS A is turned off (see page 38), signals are output only at the FRONT PRE OUT jacks.
• Each PRE OUT jack outputs the same channel signals as the corresponding SPEAKERS terminals.
• Adjust the volume level of the subwoofer with the control on the subwoofer. It is also possible to adjust the volume level with the
supplied remote control (see page 42).
• Some signals may not be output at the SUBWOOFER PRE OUT jack depending on the settings for “SPEAKER SET” (see page 86)
and “LFE/BASS OUT” (see page 88).
Connecting an external amplifier
Notes
CAUTION
FRONT
SUBWOOFER
CENTER
PRE OUT
SURROUND SURROUND BACK
L R L R L R
Front channel
amplifier
Center channel
amplifier
(U.S.A. model)
Surround in Front in
Surround channel
amplifier
Surround back channel
amplifier
Subwoofer
Surround back in
Center in Subwoofer in