Yamaha HTR-5960 - Manual (Page 43)

39
PLAYBACK
BA
S
IC
OPE
R
A
T
IO
N
5
Rotate VOLUME on the front panel (or press
VOLUME +/– on the remote control) to adjust
the volume to the desired output level.
6
Press TONE CONTROL on the front panel
repeatedly to select “TREBLE” or “BASS”
and then rotate the PROGRAM selector to
adjust the corresponding frequency
response level.
• Select “TREBLE” to adjust the high-frequency
response.
• Select “BASS” to adjust the low-frequency
response.
• Speaker and headphone adjustments are stored
independently.
• When “TONE BYPASS” is set to “AUTO” (see page 91),
and “BASS” and “TREBLE” are set to 0 dB, audio output
automatically bypasses the tone control circuitry of this
unit.
• If you increase or decrease the high-frequency or low-
frequency sound to an extreme level, the tonal quality of
the surround speakers may not match that of the front left
and right speakers.
• TONE CONTROL is not effective when the Pure Direct
mode (see page 45) is selected or when the component
connected to the MULTI CH INPUT jacks is selected as
the input source (see page 44).
• To enjoy multi-channel sources in surround, see page 48
for details.
7
Rotate the PROGRAM selector on the front
panel (or press one of the sound field
program selector buttons on the remote
control repeatedly) to select the desired
sound field program.
The name of the selected sound field program appears
in the front panel display and in the OSD.
See page 71 for details about sound field programs.
• Choose a sound field program based on your listening
preference, not merely on the name of the program.
• When you select an input source, this unit automatically
selects the last sound field program used with the
corresponding input source.
• Sound field programs cannot be selected when the
component connected to the MULTI CH INPUT jacks is
selected as the input source (see page 44).
• Sampling frequencies higher than 48 kHz (except for DTS
96/24 signals) are sampled down to 48 kHz and then sound
field programs are applied.
• To display information about the currently selected input
source in the OSD, see page 46 for details.
Notes
VOLUME
VOLUME
or
Remote control Front panel
TONE CONTROL
PROGRAM
VCR DVR pDVD CD XM V-AUX DTV/CBL MD/CD-R TUNER PHONO
VOLUME
A
SP
dB
L R
T R E B L E 0 d B
Notes
PROGRAM
STEREO
1
EFFECT
STANDARD
5
SPEAKERS
9
MUSIC
2
SELECT
6
0
ENTERTAIN
3
EXTD SUR.
7
NIGHT
10
MOVIE
4
PURE DIRECT
8
STRAIGHT
ENT.
ENHANCER
Front panel
or
Remote control
VCR DVR pDVD CD XM V-AUX DTV/CBL MD/CD-R TUNER PHONO
VOLUME
A
SP
dB
L R
T V S p o r t s
Currently selected
surround field program