Zebra Technologies P310i - Manual (Page 14)

P310 i Plastic Card printer
Card
Printer
Solutions
General information
Getting started
Operation
Cleaning
Specifications
Appendix A
Appendix B
Troubleshooting
Printing a card
Appendix C
7
Please note that the ribbon automatically
synchronizes whenever the print head lock
down occurs.
The ribbon is simultaneously identified and the
according parameters are automatically sent to
the driver.
3. Load ribbon onto the supply spindle (under print head carriage) and
empty core (with tape attached) onto the take-up spindle flange side in.
Make sure the ribbon comes off of the top of the supply spindle and feeds
to the top of the take-up spindle.
4. Push down on the Print Head Lock Lever until an audible 'click' signals
the locked-down position.
5. Close Cover.